Спасибо, только я про вот это-- Firmware Upgrade In the rare occasion a firmware upgrade is needed for the CJ1W-PNT21 PROFINET IO Controller this can be done in the Firmware Upgrade item. The IO Controller DTM must be set online to perform the upgrade. The Current Firmware Version box shows the current firmware version of the IO Controller. 1 Click the Browse button and select the new firmware file from the standard Windows File Selection window. 2 When the firmware file is opened by clicking the Open button, it will be checked for consistency. The new version number is shown in the Upgrade Firmware Version box. 3 The firmware upgrade process is started with the Upgrade Now button and the Progress is shown in the progress bar. 4 When the firmware upgrade is completed, the new version can be read out by going online with the CX-ConfiguratorFDT. The version will be visible in the Current Firmware Version. Detailed information on the Firmware Upgrade process will be delivered with the new firmware file. !Caution Do not turn off the power to the IO Controller during firmware upgrade. This may cause fatal and irreversible damage to the IO Controller. Always follow the directions supplied with the firmware file for upgrading the IO Controller Unit. Может по этому я не могу скатать конфигурацию сети, добавить модули я научился, но вот обратно прочитать выдает сообщение. Смотрим начало ))))
|